Input for
Power LED
E-bus
Coupler
supply
Input for
power contacts
Power contacts
EtherCAT
input
SC duplex
EtherCAT
output
SC duplex
Power LED
coupler
ID switch
ID switch
EK1501 | EtherCAT Coupler with ID switch, fibre optic
The EK1501 coupler connects EtherCAT with the EtherCAT Terminals (ELxxxx). A station consists of an EK1501 coupler, any number of EtherCAT Terminals, an EL9011 bus end cap or an EK1110 EtherCAT extension. The coupler converts the passing telegrams from Ethernet 100BASE-FX to E-bus signal representation. The multimode glass fibre connection enables distances of up to 2 km between two couplers – or up to 20 km for the EK1501-0010 with singlemode glass fibre connection.
The EK1501 has three hexadecimal ID switches for assigning an ID to a group of EtherCAT components. This group can then be located at any position within the EtherCAT network. Variable topologies are therefore easily implementable.
| Technical data |
EK1501 |
EK1501-0010 |
| Task within EtherCAT system |
coupling of EtherCAT Terminals (ELxxxx) to 100BASE-FX EtherCAT networks, with identity verification |
| Data transfer medium |
multimode glass fibre 50/125 µm (MM) |
singlemode glass fibre 9/125 µm (SM) |
| Distance between stations |
max. 2,000 m (100BASE-FX) |
max. 20,000 m (100BASE-FX) |
| Number of EtherCAT Terminals |
up to 65,534 |
| Type/number of peripheral signals |
max. 4.2 GB addressable I/O points |
| Number of configurable IDs |
4,096 |
| Protocol |
EtherCAT |
| Delay |
approx. 1 µs |
| Data transfer rates |
100 Mbaud |
| Configuration |
not required |
| Bus interface |
2 x SC Duplex |
| Power supply |
24 V DC (-15 %/+20 %) |
| Input current |
130 mA + (total E-bus current)/4 |
150 mA + (total E-bus current)/4 |
| Current consumption E-bus |
– |
| Current consumption 24 V DC |
typ. 70 mA |
| Current supply E-bus |
2000 mA |
| Power contacts |
24 V DC max./10 A max. |
| Weight |
approx. 190 g |
| Operating/storage temperature |
0…+55 °C/-25…+85 °C |
| Relative humidity |
95 %, no condensation |
| Vibration/shock resistance |
conforms to EN 60068-2-6/EN 60068-2-27/29 |
| EMC immunity/emission |
conforms to EN 61000-6-2/EN 61000-6-4 |
| Protect. class/installation pos. |
IP 20/variable |
| Approvals |
CE, UL, Ex |
 |
 |
 |
| Accessories |
|
| Cordsets |
cordsets and connectors |
 |
 |
| Further fibre optic products |
|
| EK1521 |
1-port EtherCAT multi-mode fibre optic junction |
 |
 |